 
Personal Air Samplers
Staplex® manufactures a complete
line of personal Air Samplers, Calibrators and Filters designed
for the professional.
Many models of Personal Air
Samplers for fast, accurate sampling results of asbestos, lead and
dusts
Primary Electronic Air Flow
Calibrators, Rotometers and Primary Bubble Flowmeter for precise
Air Sampler calibration
Pre-loaded filter cassettes and
filters with guaranteed highest quality control in the industry
All models complete and ready to
use
Made in U.S.A. and fully
guaranteed by Staplex® - The Air Sampling Specialist
All models available in 110-125
volts AC or 220-240 volts AC, 50-60 Hz
NOTE: For Staplex®
Asbestos Area Air Samplers, click here.
Background
Staplex®
Quality and Selection
Only Staplex® has a full line of
heavy-duty asbestos Air Sampling equipment, filters and
accessories for all your demanding needs. Staplex® manufactures
top-quality high volume area Air Samplers and personal Air
Samplers for use under NIOSH Method 7400, EPA A.H.E.R.A, and OSHA
air sampling methods.
The Buck Primary Electronic Air
Flow Calibrators are the fastest, most accurate and most rugged
calibrators available. The Staplex Quick Check® Calibrating
Rotometers are popular secondary calibrators. The wide selection
of filters and pre-loaded filter cassettes from Staplex are all
quality
controlled for fiber background and are
manufactured with the very highest quality control standards in
the industry.
Simple sampling with Staplex®
All Staplex® Air Sampling
equipment is designed for simple, trouble-free operation no
confusing options or operation training. Count on Staplex® Air
Samplers for fast and easy air sampling from start to finish!
Sampling with #1 - Staplex®
Staplex® - Air Sampler Division
stands tops in the field of manufacturing Air Sampling equipment
in the U.S.A. for health, safety, environmental, nuclear and
asbestos air sampling. With over 48 years of experience in
engineering and manufacturing Air Sampling equipment, Staplex® is
recognized worldwide as the "Air Sampling Specialist".
As pioneers in the asbestos air sampling field, Staplex has become
a long-time favorite among professionals!
Typical professional users of
Staplex Asbestos Air Samplers
- abatement contractors
- insulation contractors
- boiler contractors
- schools
- shipyard workers
- laboratories
- HVAC contractors
- demolition companies
- consulting & test firms
- safety inspectors
- utilities
- industrial hygienists
- government agencies
- home and building inspectors
- insurance companies
- and many more!
For sampling airborne asbestos, lead and
other dusts
Made in U.S.A.
This compact personal air sampler weighs
only 32 ounces for full-day worker comfort. Samples at flow rates
from 0.5 to 2 LPM using 0.8 micron filter cassettes. The built-in
flowmeter is calibrated every 0.2 LPM and has a recessed
electronic flow control to adjust flow rate. Includes
"ON/OFF" switch. Operates 8 hours at maximum flow rate
from internal battery pack. Includes plug-in AC charger, durable
housing, built-in pulsation dampener, 40" clear flexible
tubing with lapel spring clip, heavy-duty belt-clip, and adjusting
screwdriver. Suitable for mobile or fixed operation in normal
non-explosive atmospheres. Made in U.S.A.
Dimensions: 2-1/4" x 4" x
5-1/4" (5.7 cm x 10.2 cm x 13.3 cm).
Weight: 32 ounces (0.9 kilos).
Model PST-2X Personal Air Sampler
Recharge 110-125 volts AC, 50-60 Hz
Model PST-3X Personal Air Sampler
Recharge220-240 volts AC, 50-60 Hz
Optional accessories:
PS-2XCC Carrying Case
for air sampler, flexible tubing, charger and filter cassettes
PS-2XCC5 Five Sampler Carrying
Case for 5 sets of PST-2
air samplers, flexible tubing and chargers
For sampling airborne asbestos, lead and
dusts
Battery or AC operation
Made in U.S.A.
A durable, easy to use personal air
sampler worn by workers in asbestos abatement area. Samples at
flow rates from 0.5 LPM to 2 LPM using 0.8 micron filter
cassettes. Features built-in flowmeter calibrated every 0.2 LPM
and fully adjustable electronic flow control with locking nut,
settable over full sampling range. Operates 12 hours at maximum
flow rate from internal rechargeable battery pack or continuously
with plug-in AC adapter/charger (included). Includes replaceable
in-line filter, pulsation dampener, "run" and
"charge" indicator lights, 40" clear flexible
tubing with lapel spring clip and filter cassette inlet adapter,
heavy-duty belt clip, durable case. Suitable for mobile or fixed
operation in normal non-explosive atmospheres. Made in U.S.A.
Dimensions: 2-3/4" x 5-/4" x
7-3/8" (7 cm x 13.1 cm x 18.4 cm).
Weight: 44 ounces (1.25 kilos).
Model PST-5 Personal Air Sampler
Recharge/run 110-125 volts AC, 50-60 Hz
Model PST-6 Personal Air Sampler
Recharge/run 220-240 volts AC, 50-6O Hz
Optional accessories:
PS-5CC Carrying Case
for air sampler, flexible tubing, adapter/charger and filter
cassettes
(Click
here for pdf file)
- Compact, powerful 5-Liter Air Sampling
Pump for both High Flow (0.6 to 5 LPM) and Low Flow (5 to 600
cc/min) applications
Basic, dependable pump for personal and
area air sampling
Dual flow range easily handles filters,
impingers, cyclones, tubes
Rugged construction stands up to everyday
use
Lightweight, Compact, Easy-to-use
Easy keypad entry flow verification
One-hour rechargeable, interchangeable
battery packs
Percent Battery Charge remaining feature
puts you in control
"Auto-restart" after flow
fault, plus "Filter-Off" feature
Backlit Display for fast set-up and
operation
Programmable in three languages: English,
Spanish, French
Constant Flow Compensation up to 40"
water back pressure
Built-in Battery Maintenance program
Displays: Elapsed Time, Percent Battery
Charge remaining, Cumulative Volume Sampled and Flow rate.
Made in U.S.A.
The PST-5000 handles personal air sampling
for many industrial hygiene, safety, asbestos and lead air
sampling applications. Its advanced design, rugged dependability,
and powerful operating features give you everything you need in
one pump. The PST-5000 combines industry-leading one-hour
recharging, interchangeable standard and long run battery packs,
built-in battery maintenance program, "Auto-restart"
plus "Filter Off" protection after flow fault, intrinsic
safety, EMI-RFI protection, and water-dust resistance in a single,
compact package. Plus, flow verification is fast and easy with and
primary or secondary calibrator. You save time and money
while ensuring accurate, efficient sampling. Made in U.S.A.
Dimensions: Model PST-5000 With
Standard Battery Pack: 4.5" H x 4" W x 2" D (11.4
cm H x 10.2 cm W x 5 cm D)
Model PST-5003: With Long Run
Battery Pack: 5.75" H x 4" W x 2 " D (14.6 cm H x
10.2 cm W x 5 cm D)
Weight: Model PST-5000 With
Standard Battery Pack:19 oz. (539 g)
Model PST-5003: With Long Run
Battery Pack: 23 oz. (652 g)
PST-5000 Personal Air Sampler with
Standard Battery Pack ,
tubing, filter cassette inlet adapter and lapel clip (charger not
included)
PST-5003 same as above with Long Run
Battery Pack (instead of Standard)
Chargers:
P-5000-1SC Standard Charger, 120 VAC
P-5000-1SCA Standard Charger, 220 VAC
P-5000-1C Fast Charger, 120/230 VAC
P-5000-5C Five Station Fast Charger,
120/230 VAC
Accessories:
Sorbent Tube Holders -
P5000-AFL Adjustable Low Flow Tube Holder
(for 5 -0600 cc/min flow range)
P5000-NALFH Non-adjustable Low Flow Tube
Holder
Spare Battery Packs -
P5000-SB Standard Battery Pack
P5000-LB Long Run Battery Pack
Carrying Case-
P5000-CC Carrying Case
P5000-5CC Carrying Case for 5 each Air
Samplers, 1 each Five Station Charger and accessories
 Calibrates
100 cc to 30 LPM range using primary standard method with LCD
readout
Made in U.S.A.
Calibrates both personal and area air
samplers for flow rates up to 30 LPM based on primary standard
method. Simply press a button on the durable, impact-resistant
flow cell and the electronically calculated flow rate appears on a
4 digit LCD with an accuracy and repeatability of ± 0.5% at any
altitude. Operates for up to 8 hours from built-in rechargeable
batteries or continuously from a plug-in AC adapter/charger
(included). Super compact and portable, the rugged M-30 is ideal
for fast and accurate on-site NBS traceable calibration and
verification of sampling flow rates. Includes 500 ml bottle of
soap film solution and dispenser bottle. Made in U.S.A.
Dimensions: 5-1/2" x 6" x
2-1/2" (14 cm x 15.2 cm x 6.4 cm).
Weight: 32 ounces (.9 kilos).
Model M-3O Air Flow Calibrator
Recharge/run 110 volts AC, 50-60 Hz
Model M-30A Air Flow Calibrator
Recharge/run 220 volts AC, 50-60 Hz
Optional accessories:
M30-CC Carrying Case
for M-30, M-5 or M-1 calibrator, AC adapter/charger, soap film
solution and dispenser bottle
SFS500 Soap Film Solution
500 ml bottle
 For
Personal Air Samplers, range 1 cc to 6000 cc (.001 LPM to 6 LPM), other
specifications similar to M-30 (above)
Model M-5 Air Flow Calibrator
Recharge/run 110 volts AC, 50-60 Hz
Model M-5A Air Flow Calibrator
Recharge/run 220 volts AC, 50-60 Hz
Model M-1 Primary
Electronic Air Flow Calibrator
For personal air samplers, range 1 cc to
300 cc, other
specifications similar to M-30 (above)
Model M-1 Air Flow Calibrator
Recharge/run 110 volts AC, 50-60 Hz
Model M-1A Air Flow Calibrator
Recharge/run 220 volts AC, 50-60 Hz
 For
economical, fast and accurate calibration of area and personal air
samplers
Acrylic block flowmeters are a secondary
standard method for calibrating personal and area air sampler
airflow rates quickly and easily.
± 3% full scale accuracy exceeds current
government standards.
Virtually unbreakable components are
designed for on-site use. Simply connect Calibrating Rotometer to
air sampler with filter cassette in line and read calibrated flow
rate on Calibrating Rotometer. Includes flexible tubing and
cassette inlet adapter for quick connect to filter cassette. Made
in U.S.A.
Dimensions: 6-1/2" x 1-1/8" x
1-1/4" (16.5 cm x 2.9 cm x 3.2 cm).
Weight: 9 ounces (.3 kilos).
RC-5 Quick Check
Calibrating Rotometer for personal
air samplers,
range 0.4 to 5 LPM graduated every 0.2 LPM
RC-20 Quick Check Calibrating Rotometer for
area air samplers,
range 2 to 20 LPM graduated every 1 LPM
RC-50 Quick Check Calibrating Rotometer for
area air samplers,
range 4 to 50 LPM graduated every 2 LPM
PBF-2 Primary Bubble Flowmeter for
personal air samplers,
range 0 to 2 LPM, includes soap film
solution (pictured center)
PBF-1
Primary Bubble Flowmeter for
personal air samplers,
range 0 to 50 cc/minute, includes soap
film solution (same as pictured center)
Filter
Cassettes, Filters and Accessories
25-mm Diameter Pre-loaded
Filter Cassettes
fully conductive, with 50-mm
extension cowl and end plugs (50 per box)
TFAC22508C
Pre-loaded with 0.8 micron mixed cellulose ester (MCE)
filter and support pad (for
Method 7400/PCM analysis)
TFAC25455C
Pre-loaded with .45 micron MCE filter and 5 micron MCE
diffusion filter (for
A.H.E.R.A/TEM analysis)
TFPC25405C
Pre-loaded with 0.4 micron polycarbonate filter and 5 micron MCE diffusion filter
(for A.H.E.R.A./TEM analysis)
25-mm Diameter Filters and
Accessories
TFA2508 Filter
25-mm diameter 0.8 micron pore size mixed cellulose ester (100 per
pack)
CSP25
Cellulose support pad, 25-mm diameter (100 per pack)
37-mm Diameter Pre-loaded
Filter Cassettes
clear polystyrene housing,
center ring and end plugs (50 per box)
TFAC33708 Pre-loaded
with 0.8 micron MCE filter and support pad
TFAC33745
Pre-loaded with.45 micron MCE filter and support pad
TFAC33708MW
Matched Weight Pre-loaded with two 0.8 micron MCE filters and
support pad
37-mm Diameter Filters and
Accessories
TFA3708 Filter,
37-mm diameter 0.8 micron pore size mixed cellulose ester (100 per
pack)
CSP37
Cellulose support pad, 37-mm diameter (100 per pack)
TFAC37
Empty 37-mm diameter polystyrene (clear) cassette with center ring
and end plugs (50 per box)
Adapters and Mailing Boxes
LA 10 Inlet adapter
connects flexible tubing to filter cassette (10 per pack)
MB0610 Mailing Box,
for 6 25-mm or 12 37-mm cassettes (10 boxes/pack)
MB1804 Mailing Box,
for 18 25-mm or 36 37-mm cassettes (4 boxes/pack)
Note: All
pre-loaded Filter Cassettes and Filters are quality controlled for
fiber background. Other diameter, composition and pore size
filters also available.
- Ideal for sampling hazardous
gases and vapors for
NIOSH/OSHA methods
- Super compact 1.2” x
0.8” x 4.3” (30-mm x 20-mm x 109-mm)
- Weighs only 4 oz. (114 grams)
- Flow range 20-200 cc per
minute
-
Uses one
replaceable 9 volts alkaline or zinc carbon batteries
(eliminates charging!)for
40 hours of sampling time
- Constant flow maintained in
20-150 cc per minute range
as battery voltage drops
- Intrinsically safe
-
Uses 6-mm and
8-mm diameter charcoal tubes and other absorber and
colorimetric tubes (6-mm
charcoal tube holder included)
-
Special
clip ensures sampler stays firmly in pocket
-
Made in
U.S.A.
Specifications:
PST-1DT Detector Tube Personal Air Sampler
(includes
6-mm charcoal tube holder and 9 volt battery)
Optional Accessories:
PST-1DTCC Carrying Case
PST-1DTCC8 Carrying Case for 8 units
TH-6 Charcoal Tube Holder for 6-mm tubes
TH-8 Charcoal Tube Holder for 8-mm tubes
TH-10 Holder for Colormetric Tubes or two
6-mm charcoal tubes in series for Methylene Chloride
CT-6 Charcoal Tubes (50 per pack)
PFB-1 Primary Bubble Flowmeter
- for 0-50 cc/min
calibration range
|
