 
Asbestos Area Air Samplers
Staplex® manufactures a
complete line of area and personal Air Samplers, Calibrators and
Filters designed for the professional.
- Area and personal Air
Samplers for fast, accurate sampling results of asbestos,
lead and dusts
- Primary Electronic Air Flow
Calibrators, Rotometers and Primary Bubble Flowmeter for
precise Air Sampler calibration
- Pre-loaded filter cassettes
and filters with guaranteed highest quality control in the
industry
- All models complete and
ready to use
- Made in U.S.A. and fully
guaranteed by Staplex® - The Air Sampling Specialist
All models available in 110-125
volts AC or 220-240 volts AC, 50-60 Hz. For 12 volt DC
battery powered asbestos air samplers, see Model EC-1-12V and
EC-1-12VBC below.
NOTE: For Staplex®
Personal Air Samplers, click here.
Background
Staplex® Quality and
Selection
Only Staplex® has a full line
of heavy-duty asbestos Air Sampling equipment, filters and
accessories for all your demanding needs. Staplex® manufactures
top-quality high volume area Air Samplers and personal Air
Samplers for use under NIOSH Method 7400, EPA A,H.E.R.A, and
OSHA air sampling methods.
The Buck Primary
Electronic Air Flow Calibrators are the fastest, most accurate
and most rugged calibrators available. The Staplex Quick Check®
Calibrating Rotometers are popular secondary calibrators. The
wide selection of filters and pre-loaded filter cassettes from
Staplex are all quality controlled
for fiber background and are manufactured with the very highest
quality control standards in the industry.
Simple sampling with
Staplex®
All Staplex Air Sampling
equipment is designed for simple, trouble-free operation no
confusing options or operation training. Count on Staplex® Air
Samplers for fast and easy air sampling from start to finish!
Sampling with #1 - Staplex®
Staplex® - Air Sampler
Division stands tops in the field of manufacturing Air Sampling
equipment in the U.S.A. for health, safety, environmental,
nuclear and asbestos air sampling. With over 45 years of
experience in engineering and manufacturing Air Sampling
equipment, Staplex® is recognized worldwide as the "Air
Sampling Specialist". As pioneers in the asbestos air
sampling field, Staplex has become a long-time favorite among
professionals!
Typical professional users of Staplex
Asbestos Air Samplers
- abatement contractors
- safety inspectors
- industrial hygienists
- government agencies
- consulting & test firms utilities
- home and building inspectors
- insurance companies
- insulation contractors
- boiler contractors
- schools
- shipyard workers
- laboratories
- HVAC contractors
- demolition companies
- and many more!
 #1
best seller for asbestos background level and clearance air
sampling!
The Staplex® Model EC-1 is a
basic, economical area air sampler - powerful enough to perform
full-day workloads for inspection sampling, adjacent sampling or
clearance sampling. Open design minimizes decontamination. Fully
adjustable locking flow control valve allows flow rate setting
up to NIOSH Method 7400 maximum of 16 LPM and EPA A.H.E.R.A.
maximum of 10 LPM. Includes dual intake filter/muffler system
for exceptionally quiet operation, in-line on/off switch,
thermal overload protection, grounded 8' cordset, non-skid
bumpers, carrying handle, flexible tubing, and separate
fold-away cassette stand for vibration-free sampling to 60"
(i 52 cm) height. Suitable for mobile or fixed operation in
normal non-explosive atmospheres. Made in the U.S.A.
Use Model EC-1 (without
cassette stand) as a Forensic Dust Sampler with Staplex
No. TFAC33708 Preloaded 37-mm diameter 0.8 micron Mixed
Cellulose Ester Filter Cassettes for collection of dusts and
fibers at a crime scene.
Dimensions:
4" x 5" x 12-3/4" (10 cm x 12.7 cm x 32.4 cm).
Weight:
9.5 pounds (4.3 kilos).
Ordering information:
Model EC-1
Econometric Air Sampler 110-125 volts AC, 50-60 Hz, complete
with cassette stand
Model EC-1A
same as above for 220-230 volts AC, 50 Hz
Model EC-1G
Econometric Air Sampler with Vacuum Gauge 110-125 volts AC,
50-60 Hz, complete with cassette stand
Model
EC-1GA same as above for 220-230 volts AC, 50 Hz
Model EC-1-12V
Battery-powered Econometric Air Sampler for 12 volts DC (draws.
approx. 13 amps) [no on/off switch, battery not included]
Model EC-1-12VBC
for 12 volts VC with battery cables
Optional accessories:
RC-20 Quick Check Calibrating
Rotometer acrylic block flowmeter for checking airflow,
range 2 to 20 liters per minute graduated every 1
LPM, ±3% full scale accuracy
EC-CC Carrying Case with handle
holds one Econometric Air Sampler
EC-CC2 Carrying Case with
handle holds two Econometric Air Samplers
EC-CS Extra Cassette Stand
DTM-1 Digital Timer with LCD
readout, 115 volts AC
DTM-2 Digital Timer with LCD
readout, 230 volts AC
 Staplex® EC-45
5-port Econometric Air Sampler
Takes fire air samples at once!
10-12 LPM fair flow rate with
0.8 micron MCE 25-mm or 37-mm diameter filter cassettes.
Includes 5 ports each with an
adjustable needle valve, carrying handle, 8" grounded cord set
with inline ON/OFF switch, 5 sets of 60" long tubing.
Weight:
33.3 lbs. (15.3 kilos).
 features
built-in rotometer for monitoring flowrate during sampling
Fast, efficient area air sampler for
professional inspection, adjacent, and clearance sampling.
Features fully adjustable flow control valve and built-in 3 to
25 LPM rotometer. Minimizes sampling time by sampling at flow
rates up to 16 LPM (maximum allowed by NIOSH Method 7400) using
25-mm diameter 0.8 micron filter cassettes or up to 1 0 LPM
(maximum allowed by EPA A.H.E.R.A.) using .45 or .4 micron TEM
filter cassettes. Includes sound-suppressed pump with thermal
overload protection, portable cassette stand to extend sampling
height to 60" (152 cm) [NOTE: attachable telescoping arm no
longer available], flexible tubing, lighted on/off switch, 8'
grounded cordset, all built into a rugged compact protective
housing with a convenient carrying handle. Suitable for mobile
or fixed operation in normal non-explosive atmospheres. Made in
USA.
Dimensions: 4-1/2" x
5-3/4" x 91/4" (11.4 cm x 14.6 cm x 23.5 cm).
Weight: 11 pounds (5 kilos).
Ordering information:
Model VM-3
Volumetric Air Sampler 110-125 volts AC, 50-60 Hz
Model VM-4 Volumetric Air Sampler 220-240 volts AC, 50-60 Hz
Optional accessories:
 RC-20
Quick Check Calibrating Rotometer
- acrylic block flowmeter for checking
airflow, range
2 to 20 liters per minute graduated every 1 LPM, ±3%
full scale accuracy
RC-50 Quick Check Calibrating Rotometer
- 4-50 liter per minute range graduated every 1
LPM
EC-CS Extra Cassette Stand - extends
to 5' (152 cm)
DTM-1
Digital Timer with LCD readout, 115 volts AC
DTM-2 Digital Timer with LCD readout,
230 volts AC
VM-CC Carrying Case with handle,
shoulder strap, external mount for cassette stand, and storage
space for filter cassettes
|
